Razor-Back Rebar Hook with Wood Handle Review
- 20-inch steel concrete rake head with a built-in rebar hook
- 60-inch North American hardwood handle for reach into the pour
- Steel ferrule reinforces the head-to-handle connection
Opens Amazon.com · see today's price & availability
Half concrete rake, half rebar hook: a 20-inch steel head for moving and leveling wet concrete, plus a hook for lifting reinforcement into the pour.
Quick verdict
The Razor-Back Rebar Hook with Wood Handle is really two concrete tools in one. A 20-inch steel head pushes, pulls and roughly levels wet concrete, and the hook on the back lifts rebar or wire mesh up into the slab. With a 60-inch hardwood handle and a steel ferrule, it is a practical, well-specified choice for driveways, patios and other flatwork.
Pros and cons
What we like
- Two jobs in one tool: concrete rake head plus rebar hook
- Wide 20-inch steel head moves a lot of concrete per pull
- 60-inch hardwood handle lets you work the pour from its edge
- Steel ferrule strengthens the head-to-handle connection
- 4.8 pounds: solid, but not a chore to push and pull all day
What could be better
- Wood handle needs cleaning and dry storage after every pour
- Specialized tool with little use outside concrete work
- Sharp head edges call for gloves and care
- No published blade height or hook dimensions
Key features, explained
Concrete rake and rebar hook in one
This tool is listed as a concrete rake with a rebar hook, and that is an accurate description. The 20-inch steel head is the rake: it moves wet concrete from where the chute or wheelbarrow drops it and spreads it roughly level before screeding. The hook, mounted on the back of the head, handles a different job. Having both on one handle means one less tool to carry around a busy pour.
Why the rebar hook matters
Rebar and welded wire mesh only reinforce a slab properly when they sit within the concrete rather than on the ground beneath it. During a pour, workers often step on the mesh or concrete pushes it down. A rebar hook lets you reach in, catch the steel and pull it up into the slab as you go. On jobs that use mesh, such as many driveways and patios, that small step makes a real difference to the finished slab.
20-inch steel head
The head is steel, 20 inches wide, which is broad enough to move a good volume of concrete with each pull while staying manageable when the mix is stiff. The manufacturer's description stresses that the tool should both move and level concrete, which is the job a placing rake exists for. The full tool weighs 4.8 pounds, enough to feel solid without wearing you out over a long pour.
60-inch hardwood handle and steel ferrule
The handle is 60 inches of North American hardwood, long enough to reach into a form from outside it instead of wading through wet concrete. A steel ferrule wraps the joint where the handle meets the head, which the manufacturer specifies for the strongest possible blade-and-handle connection. That joint takes most of the strain when you drag heavy mix, so reinforcement there is welcome.
Safety and cleanup
The manufacturer's safety note is direct: handle sharp edges with caution and wear appropriate safety gear. With wet concrete, that should mean gloves, eye protection and boots, since fresh concrete is caustic and can irritate or burn skin. Hose the head and handle clean before the concrete sets, then let the wood dry fully before storing it. A little care keeps the handle sound for many pours.
Razor-Back Rebar Hook specs
| Brand | Razor-Back |
|---|---|
| Model | 83154 |
| Type | Concrete rake with rebar hook |
| Head | 20" steel with rebar hook |
| Head material | Alloy steel |
| Handle | 60" North American hardwood |
| Head-to-handle joint | Steel ferrule |
| Weight | 4.8 lb |
| Prices change often. See the live price: Check Price | |
Who should buy it?
Great for
- Pouring or replacing driveways, patios and walkways
- Slabs with wire mesh or rebar that needs lifting into the pour
- Contractors and DIYers who want one tool for placing and hooking
Skip it if
- You need a toothed rake for grading soil or gravel
- You only patch small cracks and never pour full slabs
- You want a fiberglass handle that needs less upkeep
Frequently asked questions
What is a rebar hook used for?
Lifting rebar or welded wire mesh up into the middle of a concrete slab during the pour. Reinforcement only does its job when it is embedded in the concrete, not lying flat on the ground beneath it.
Is this a concrete rake or a rebar hook?
Both. The 20-inch steel head works as a concrete rake for moving and leveling wet concrete, and the hook on the back of the head lifts rebar or mesh.
How long is the handle on the Razor-Back rebar hook?
The handle is 60 inches of North American hardwood, joined to the head with a steel ferrule. The complete tool weighs 4.8 pounds.
How do I clean it after a pour?
Rinse the head and handle with water before the concrete starts to set, scrub off any buildup, and let the wooden handle dry completely before you store it.
What safety gear should I wear when working with concrete?
Gloves, eye protection and boots at minimum. The manufacturer warns to handle the head's sharp edges with care, and wet concrete is caustic enough to irritate or burn skin.
Final verdict
The Razor-Back Rebar Hook with Wood Handle earns its place on a pour by doing two jobs well: a 20-inch steel head moves and levels wet concrete, and the built-in hook pulls reinforcement up where it belongs. A 60-inch hardwood handle and a steel ferrule round out a sensible build. It is a specialist tool and the wood handle needs cleaning after each job, but for driveways, patios and other flatwork it is easy to recommend.
Check PriceOpens Amazon.com · see today's price & availability
