Rage 3-Blade Chisel Tip SC Mechanical Broadhead Review
- Three sweptback blades open to a 1.6" cutting diameter
- Steel chisel tip made to punch through bone
- Shock Collar retention on an anodized aluminum ferrule
Opens Amazon.com · see today's price & availability
Three sweptback blades, a 1.6-inch cut and a steel chisel tip: Rage's 3-blade take for hunters who want more edges in the animal. Here's how the specs stack up.
Quick verdict
The 3-Blade Chisel Tip SC is the Rage to pick if you want three cutting edges and a bone-ready tip rather than the widest possible hole. Its 1.6-inch cut is narrower than Rage's 2-blade heads, but it adds a third blade and should ask less of your arrow's energy. Thick .035" blades and a Shock Collar round out a well-specified head.
Pros and cons
What we like
- Three blades open to 1.6", putting more edges into the animal than a 2-blade
- Steel chisel tip designed to punch through bone
- .035" blades that Rage says won't fold back on tough material
- Shock Collar keeps blades closed until impact
- Replaceable blades let you keep using the same ferrule
What could be better
- 1.6" diameter is narrower than Rage's 2" 2-blade heads
- Replacement blade part number isn't listed for this head
- Three mechanical blades mean more parts to inspect after every shot
- Expandable heads are off-limits for some hunts
Key features, explained
Three blades, 1.6-inch cut
This head's defining trade is diameter for blade count. Where Rage's 2-blade heads open to 2 inches, the 3-Blade Chisel Tip SC spreads three sweptback blades to 1.6 inches. Rage pitches the result as a bigger cut than 2-blade designs, since a third blade adds another cutting path through tissue. A narrower diameter also takes less energy to drive through an animal, which can make this head a better fit for setups that aren't especially fast or heavy.
Steel chisel tip for bone
Up front is a faceted steel chisel tip. A chisel point is built to split hard material instead of skidding off it, and Rage says this one punches through bone that stops other mechanical heads. That matters most on quartering shots and on hits that catch a rib or shoulder blade, where a weaker tip can deflect or fold. The manufacturer lists the tip as steel but doesn't give a grade or hardness.
Shock Collar retention and SlipCam deployment
Blade retention comes from Rage's Shock Collar, which holds the blades closed in the quiver and in flight so they can't open early and spoil the shot. On impact the collar lets go and the SlipCam mechanism deploys the blades rearward. With three blades to control instead of two, dependable retention matters even more, and a collar is a cleaner solution than the rubber bands older mechanical designs depended on.
Blade thickness and ferrule
The blades are .035" thick, and Rage says that's enough to keep them from folding back on tough material. They ride on an anodized aluminum ferrule that the manufacturer describes as light but able to take hard impacts without cracking. The light ferrule helps keep three blades and a steel tip within a standard 100-grain head. As with any mechanical, spin each one on your arrows before the season to make sure it runs true.
Refurbishing and pack details
This is a 3-pack of 100-grain heads, part 60100 (model R60100). Replacement blades are available, so a head that survives a shot can be re-bladed rather than replaced, keeping the same ferrule in service. The product data doesn't name the replacement blade part number, so confirm it against Rage's parts list before ordering spares, and retire any head whose ferrule or tip is bent.
Rage 3-Blade Chisel Tip SC specs
| Brand | Rage (Feradyne Outdoors) |
|---|---|
| Model | R60100 (part 60100) |
| Type | 3-blade mechanical, rear-deploying (SlipCam) |
| Tip | Steel chisel tip |
| Cutting diameter | 1.6 inches |
| Blades | .035" thick, sweptback |
| Blade retention | Shock Collar |
| Ferrule | Anodized aluminum |
| Weight | 100 grain |
| Pack size | 3 broadheads |
| Replacement blades | Available (sold separately) |
| Prices change often. See the live price: Check Price | |
Who should buy it?
Great for
- Hunters who want three cutting edges and a bone-splitting tip
- Setups that struggle to drive a full 2" mechanical cut
- Archers who like to re-blade heads and keep ferrules in service
Skip it if
- You want the largest possible entry hole; a 2" 2-blade cuts wider
- Your regulations prohibit expandable broadheads
- You prefer a simple head with fewer moving parts
Frequently asked questions
How wide does the Rage 3-Blade Chisel Tip SC cut?
1.6 inches across three blades. That's narrower than Rage's 2-inch 2-blade heads, but the third blade adds another cutting edge.
Is the 3-blade Rage better than the 2-blade?
Neither wins across the board. The 2-blade cuts a wider 2" hole; the 3-blade puts three .035" blades into a 1.6" cut. Choose the 3-blade if you want more edges in a narrower head that is easier to drive through.
Does the Rage 3-Blade Chisel Tip SC need rubber bands?
No. A Shock Collar holds the three blades closed during storage and flight, then releases on impact. Fit a fresh collar before reusing a head.
Can I replace the blades on the Rage 3-Blade Chisel Tip SC?
Yes. Rage offers replacement blades for this head, so you can swap dull or damaged blades and keep the ferrule. Retire a head if the ferrule or tip is bent.
What weight is the Rage 3-Blade Chisel Tip SC?
This pack holds three 100-grain heads (part 60100). Make sure 100 grain fits your arrow's front-of-center plan before you commit.
Final verdict
The 3-Blade Chisel Tip SC is a balanced take on the Rage formula: a steel chisel tip for bone, three .035" blades and a 1.6-inch cut that gives up some diameter for an extra edge. Shock Collar retention, SlipCam deployment and replaceable blades complete a well-documented spec sheet. If you value edges and toughness over the biggest possible hole, it's an excellent pick.
Check PriceOpens Amazon.com · see today's price & availability
