Bully Tools 14-Gauge Round Point Shovel Review
- 14-gauge USA-made steel blade with a protective powder coat
- Extended neck riveted along the handle for extra reinforcement
- 46" fiberglass handle with a no-slip polypropylene D-grip
Opens Amazon.com · see today's price & availability
A made-in-Ohio digging shovel with a 14-gauge steel blade, a riveted extended neck and a compact 46-inch D-grip. Here's where its size helps, and where a long handle wins.
Quick verdict
The Bully Tools 14-Gauge Round Point Shovel is a heavy-gauge digging shovel made entirely in the USA. Its steel blade, extended riveted neck and veil-coated fiberglass handle target the usual failure points, and the D-grip at 46 inches overall gives close control for planting holes, trenching and edging. Taller diggers after maximum leverage may prefer a long handle, but for precision digging it is a sturdy, well-made choice.
Pros and cons
What we like
- Thick 14-gauge American steel blade, powder coated against rust
- Extended neck reinforces the joint where blade meets handle
- Polyester-veil fiberglass handle won't splinter and resists moisture
- D-grip gives close control and fits gloved hands
- Wide foot plate lets you step down and dig deeper
- Made in Steubenville, Ohio
What could be better
- 46 inches overall is short for tall diggers wanting maximum leverage
- At 4.7 pounds, heavier than light-duty garden shovels
- The open back can hold sticky, wet soil
- Arrives needing a quick assembly with a screwdriver
Key features, explained
14-gauge American steel blade
The blade is 14-gauge steel, made in the USA, which is thicker stock than most light-duty garden shovels use. It is an open-back design finished in a protective powder coat that resists rust and extends the life of the tool. The round point concentrates your weight onto a small area, which is what lets a shovel bite into compacted soil and slice through roots instead of skating across the surface.
Extended, riveted neck
Where blade meets handle is where shovels usually fail, especially when you lever against a root or a buried rock. Bully extends the steel neck further up the handle and secures it with strong rivets, so the joint is reinforced along a longer section. That gives the handle more support under prying loads and cuts down flex at the socket. It is a simple design choice, but it is the one that matters most to the life of a digging shovel.
Fiberglass handle with polyester veil
The handle is fiberglass, coated in a polyester veil that prevents splintering and adds strength over bare fiberglass. Unlike wood, it resists moisture and UV degradation, so the shovel can stay out in the yard through a long project without swelling, cracking or drying out. The veil also spares your hands the loose glass fibers that a bare fiberglass handle can shed as it weathers.
D-grip and wide foot plate
At the top is a D-shaped polypropylene grip with a no-slip texture, sized to accommodate work gloves and designed to increase leverage and reduce hand fatigue. Bully calls it nearly indestructible. At the business end, a wide foot plate gives your boot a solid platform for driving the blade down into any soil type. The head measures 11.5 inches long, 9.5 inches wide and 1.5 inches deep, a full-size digging blade.
Who the 46-inch size suits
With the D-grip, the shovel is 46 inches long overall. That's compact by digging-shovel standards, and it is deliberate: the shorter length gives close control for garden beds, planting holes, edging around pavers and trenching. If you dig large holes or are tall, a long straight handle gives more leverage and a more upright stance. Bully Tools builds it in Steubenville, Ohio, and assembly takes under a minute with a Phillips head screwdriver.
Bully Tools Round Point Shovel specs
| Brand | Bully Tools |
|---|---|
| Model | 62510 |
| Type | Round point shovel, open back |
| Blade | 14-gauge USA steel, powder coated |
| Head size | 11.5 x 9.5 x 1.5 in (L x W x D) |
| Neck | Extended, riveted |
| Handle | Fiberglass with polyester veil |
| Grip | Polypropylene D-grip, no-slip texture |
| Overall length | 46 in |
| Weight | 4.7 lb |
| Assembly | Phillips head screwdriver |
| Made in | USA (Steubenville, Ohio) |
| Prices change often. See the live price: Check Price | |
Who should buy it?
Great for
- Planting holes, garden beds and trenches that need close control
- Edging around pavers and hardscape
- Gardeners who want a USA-made shovel that can live outdoors
Skip it if
- You're tall and want a long handle for maximum leverage
- Your main job is moving loose material, a square point's specialty
- You want the lightest possible shovel for quick planting
Frequently asked questions
How long is the Bully Tools 14-gauge round point shovel?
The D-grip version is 46 inches long overall. The head measures 11.5 inches long, 9.5 inches wide and 1.5 inches deep.
What does 14-gauge mean on a shovel?
It describes the thickness of the steel. Lower gauge numbers are thicker, and 14-gauge is heavy for a shovel blade, which helps it resist bending in hard soil.
Does the Bully Tools round point shovel need assembly?
Yes, but it is quick. Bully Tools says it assembles in under a minute with a Phillips head screwdriver.
Is a fiberglass shovel handle better than wood?
Fiberglass resists moisture and UV degradation, so it won't swell or rot outdoors. The polyester veil on this handle also prevents splintering.
Where is the Bully Tools round point shovel made?
In Steubenville, Ohio. Bully Tools is a family-owned company that has made its tools in the USA since 1994.
Final verdict
The Bully Tools 14-Gauge Round Point Shovel puts its strength where digging shovels usually fail: a thick USA-made steel blade, an extended neck riveted along the handle and a veil-coated fiberglass shaft that shrugs off weather. The 46-inch D-grip suits precision work more than big excavation, so taller diggers may want a long handle. For garden beds, planting and trenching, it is a durable, well-built choice.
Check PriceOpens Amazon.com · see today's price & availability
