A complete tripod gravity feeder with a 30-gallon polymer hopper and three hooded feed tubes. No motor, no timer, no battery: just feed, gravity and a lid.
Quick verdict
This is about as low-fuss as deer feeding gets. A weather-resistant 30-gallon polymer hopper sits above a twist-lock gravity head with three 8-inch feed tubes, shaded by a hooded overhang and edged with a 3/4-inch lip. There's no motor, timer or battery to manage. The trade-off is control: feed flows as deer eat it, so there's no schedule or portion to set.
Pros and cons
What we like
- Nothing electronic to fail, program or recharge
- 30-gallon hopper holds a large load of feed between refills
- Three 8-inch tubes give deer room at several feeding stations
- Hooded overhang helps keep feed in the tubes dry
- Raised 3/4-inch lip helps cut down on spilled and wasted feed
- Listed as rust resistant and weatherproof
What could be better
- No timer or portion control; feed is there whenever deer want it
- No varmint guard is listed for the open feed ports
- Listed at 24 pounds before you add any feed
- Capacity is given in gallons, not pounds of feed
Key features, explained
Gravity instead of gears
Spin feeders throw feed on a schedule; a gravity feeder simply lets it settle into the ports as animals eat. American Hunter builds this one around that idea, with a twist-lock gravity feeder system that needs no batteries, timers, motors or electronics. That means nothing to program at the start of the season, no battery to haul in, and fewer components that can fail between visits. Your main job is keeping the hopper filled and the ports clean.
The 30-gallon polymer hopper
The hopper is a weather-resistant polymer shell with a 30-gallon capacity, and its flat mounting design is meant to hold the gravity head securely for long-term outdoor use. In the product photo it is a rounded black body with a lid on top and the American Hunter logo on the side. The complete feeder is listed at 24 pounds empty, and the listing describes it as rust resistant and weatherproof. Capacity is quoted in gallons only, so how many pounds it holds will depend on the feed you use.
Three tubes, three feeding stations
Below the hopper, the gravity head splits feed into three 8-inch feed tubes. American Hunter calls them oversized and says they are designed for smooth, clog-free flow while spreading feed across multiple feeding stations. In practice, three separate ports give more than one deer room to feed at a time, which can mean less crowding at a single opening. In the photo, the ports sit low on the head, between three metal legs.
Hood and lip: keeping feed dry and in place
A hooded overhang shields the feed ports from rain and harsh weather, which matters on a feeder that may sit untouched for days or weeks. A raised 3/4-inch feed lip at the opening helps hold feed in place, reducing waste and overfeeding. Neither feature turns a gravity feeder into a timed one, but together they help more of the feed you buy stay dry, fresh and in the port instead of on the ground.
Setup, placement and local rules
The maker describes the feeder as easy to assemble and operate, and pitches it for deer management, food plots and hunting properties. The listing's safety notes cover the basics: don't overfeed, use feed suitable for the target species, secure the feeder, and check local regulations. That last point matters, because rules on feeding and baiting wildlife differ from state to state. Leg height isn't listed, so plan your site and refill access once it arrives.
American Hunter 30-Gal Gravity specs
| Brand | American Hunter |
|---|---|
| Model | AH-225GRAV |
| Manufacturer | GSM Outdoors |
| Type | Tripod gravity feeder (nesting hopper with gravity feeder head) |
| Hopper | 30-gallon weather-resistant polymer, flat mounting design |
| Feeder head | Twist-lock gravity system |
| Feed ports | Three 8" feed tubes |
| Feed protection | Hooded overhang, 3/4" raised lip |
| Power | None (no batteries, timers, motors or electronics) |
| Weight | 24 lb (empty) |
| Finish | Listed as rust resistant and weatherproof |
| Target species | Deer |
| Prices change often. See the live price: Check Price | |
Who should buy it?
Great for
- Food-plot and property managers who want feed out with minimal upkeep
- Hunters who'd rather refill a hopper than troubleshoot a timer
- Sites where several deer feed together and need room at the ports
Skip it if
- You want feedings at set times and in measured portions
- Raccoons and other feed thieves already plague your site
- You already own a hopper and need only a gravity head
Frequently asked questions
Does the American Hunter 30-gallon gravity feeder need batteries?
No. It is a gravity system with no batteries, timers, motors or electronics. Feed flows down into the three tubes as deer eat from them.
How many feed ports does it have?
Three 8-inch feed tubes, protected by a hooded overhang and a 3/4-inch raised lip. That gives deer three separate places to feed.
How much does the feeder weigh?
It is listed at 24 pounds before feed. A full 30-gallon load adds considerably more, so plan the carry and setup with that in mind.
Can you control how much feed it puts out?
Not with a timer or setting. The hooded overhang and raised lip are designed to limit waste and overfeeding, but deer can eat whenever feed is in the ports.
Do I need to check any rules before setting up a gravity feeder?
Yes. Feeding and baiting wildlife is regulated differently from state to state, and the listing's own safety notes say to check local regulations. Read the current rules for your area first.
Final verdict
If you want deer feed available with almost no upkeep, this 30-gallon gravity feeder makes a strong case. A weather-resistant polymer hopper, a twist-lock gravity head with three 8-inch tubes, a hooded overhang and a 3/4-inch lip cover the essentials, and there are no batteries or timers to fail. You give up scheduling and portion control, and no varmint guard is listed, but for set-and-refill feeding it is easy to recommend.
Check PriceOpens Amazon.com · see today's price & availability