A gravity feeder head, not a full feeder: three angled tubes with adjustable inner sleeves that mount under a hopper you supply. Here's what the design gets right.
Quick verdict
The 3-Way Gravity Tube is a feeder head, not a complete feeder: it mounts under a hopper or container you already own and splits feed into three tubes. Adjustable inner sleeves set the flow, a 9-degree tube angle keeps feed moving, and twist-lock or flat mounting widens the list of setups it fits. With no electronics on board, there's very little to maintain.
Pros and cons
What we like
- Adjustable inner sleeves let you regulate feed flow
- Three tubes give several deer room to feed at once
- Fits both twist-lock and flat-mount setups
- No batteries, timers or electronics to maintain
- Hooded overhang and 3/4-inch lip protect feed and limit spills
- Light at a listed 4 pounds
What could be better
- Hopper or container not included; this is the feeder head only
- Gravity flow means no feeding schedule or timed portions
- No varmint guard is listed for the open tube ends
- Check your hopper's mount type before ordering
Key features, explained
What's actually in the box
The listing describes this as a gravity protein feeder head attachment, and the included component is exactly that: the head. There is no hopper, barrel or stand, so plan to mount it under a container you already have. In the product photo it is a black unit with a round collar and mounting flange on top and three tubes branching out from the center at an angle. At a listed 4 pounds, it is light enough to carry in with the rest of your gear.
Adjustable sleeves for flow control
Gravity feeders usually trade control for simplicity, and this is where the 3-Way tries to claw some of it back. Each 8-inch feed tube has an adjustable inner sleeve that regulates how freely feed flows, so you can customize dispensing to the rate you prefer. Opening the sleeves suits a busy feeding site; closing them down slows how fast the hopper empties. It is still free-choice feeding, but you get a dial where most gravity heads give you none.
Tube geometry: 3.5 inches wide at 9 degrees
American Hunter lists three tubes at 3.5 inches in diameter, set at a 9-degree angle. That angle is meant to encourage smooth flow toward the opening while keeping the feeding area clean and controlled, rather than spilling feed onto the ground. With three openings pointing in different directions, more than one animal can feed at a time, which the maker describes as maximizing feeding access.
Twist-lock or flat mounting
Mount compatibility decides whether an attachment is useful, and the 3-Way covers both common styles here: it is built with twist-lock and flat mounting options. That gives it a better chance of fitting the hopper or container you already run, including setups you might move from timed spin feeding to gravity. Confirm which style your hopper uses before ordering, since the listing doesn't name specific hopper models.
Weather protection and upkeep
A hooded overhang shields feed from rain and harsh weather, and a 3/4-inch lip helps stop spillage and waste. With no batteries, timers or wiring, upkeep comes down to refilling the hopper, keeping the tubes clear and adjusting the sleeves as feeding pressure changes. Before you set it out, check your state's rules: feeding and baiting wildlife is regulated differently from one state to the next.
American Hunter 3-Way Gravity Tube specs
| Brand | American Hunter |
|---|---|
| Model | AH-GRAV-KIT |
| Type | 3-way gravity feeder head attachment |
| Included | Feeder head only (hopper not included) |
| Feed tubes | Three 8" tubes, 3.5" diameter, 9-degree angle |
| Flow control | Adjustable inner sleeves |
| Mounting | Twist-lock or flat mount |
| Weather protection | Hooded overhang, 3/4" lip |
| Power | None (no batteries, timers or electronics) |
| Weight | 4 lb |
| Target species | Deer |
| Prices change often. See the live price: Check Price | |
Who should buy it?
Great for
- Owners of a twist-lock or flat-mount hopper who want gravity feeding
- Hunters moving from timed spin feeding to a no-electronics setup
- Managers who want to tune flow without programming a timer
Skip it if
- You don't have a hopper or container to mount it under
- You want feedings at set times of day
- Non-target animals regularly clean out your feeders
Frequently asked questions
Does the 3-Way Gravity Tube include a hopper?
No. It is sold as a feeder head attachment only. You mount it under a hopper or container you already own, using either the twist-lock or flat mount.
How do you control feed flow on the 3-Way Gravity Tube?
Each of the three feed tubes has an adjustable inner sleeve. Setting the sleeves changes how freely feed flows, so you can match output to how hard deer are using the site.
What size are the feed tubes?
The listing gives three 8-inch tubes with a 3.5-inch diameter, angled at 9 degrees to help feed flow smoothly toward the opening.
Does it need batteries or a timer?
No. It works on gravity alone, with no batteries, timers or electronic parts. That keeps maintenance low, but it also means there is no feeding schedule to set.
What kind of feed is it meant for?
The listing classifies it as a gravity protein feeder head. Use a feed suited to deer and to your hopper, and check local rules on feeding wildlife before you fill it.
Final verdict
The 3-Way Gravity Tube is a smart, simple way to turn a hopper you already own into a gravity feeder. Three 3.5-inch tubes at a 9-degree angle, adjustable inner sleeves for flow, a hooded overhang, a 3/4-inch lip and twist-lock or flat mounting cover what a gravity head needs, with no electronics to maintain. Just remember it is the head only: bring your own hopper and confirm the mount style first.
Check PriceOpens Amazon.com · see today's price & availability